This is the EV-Peak CQ3, 400Watt Four Port Quad Charger. The charger has a selectable voltage switch so it can be used worldwide.

LiHV Battery Support
This high-end charger supports the new LiHV chemistry battery! Charge, discharge and storage charge your LiHV's

Convenience:
Charge FOUR batteries at once! Even if they are not the same chemistry, voltage, or capacity. This charger has 4 individual charge ports and plugs directly into the wall. It also can be connected to a DC power source such as a 12V car battery or a DC Power Supply. The Charger also features LiPo Balance Charge, LiPo Storage, and LiPo Discharge modes.

High Power:
The CQ3 can output up to 100Watts/10Amps from each port at the same time! Each port is fully independent of each other and has its own dedicated power! Using 100Watts/10Amps on a port in no way limits any of the other ports' ability to charge to its full potential! Max the charger out by using 100Watts/10Amps on each port at the same time for a total of 400Watts!

Reliability:
EV-Peak is known for their great reliability. They use the best internal components and circuitry available to create long lasting products.

High Power Output:
This charger boasts 100Watts of power per port! Most chargers such as Hitec only offer 50Watts per channel. But this charger leaves them all in the dust, allowing your packs to charge faster! It offers a 10Amp charge rate!

Digital Power Mode
Each Port can act as a power supply! Use this function to power external items such as a pit light, tire truer, motor checker, charger, or anything else that runs off of DC power. Both the Voltage and Amperage are adjustable to suit the needs of the connected device.

Lithium Cell Check
Check the voltage of a Lithium battery's cells when plugged into the balance port. Simply hold the INC button when in a Lithium menu. The screen will provide a readout of each cell’s voltage.

Adjustable Cutoff Voltage
The voltage per cell at which the charger stops charging the battery can be adjusted for fine user precision. Adjustments available for LiPo, LiHV, LiIo, LiFe, Pb batteries.

Menu Options:

LiPo Battery, LiIon Battery, LiFe Battery, LiHv Battery
- Charge (Final Cell Voltage is Adjustable in User Settings.)
- Balance Charge (Balances cells inside of battery for optimal performance & safety. Final Cell Voltage is Adjustable in User Settings.)
- Storage Mode (Brings battery to approx. half charge, best for long term non-use)
- Discharge (Final Cell Voltage is Adjustable. LiPo 3.0V-4.0V. LiIo 3.0V-4.0V. LiFe 2.0V-3.0V, LiHv 3.0V-4.2V)
NiMH & NiCd Battery
- Manual Charge (Manually set charge amperage)
- Auto Charge (Set amperage limit, charger will auto adjust)
- Discharge (Voltage adjustable from 0.1V-24.0V)
- Cycle (Cycle Charge/Discharge or Discharge/Charge up to 5 times)
Pb (Lead Acid batteries such as the battery in your car)
- Charge
- Discharge
Digital Power
- Use this function to power external items such as a pit light, tire truer, motor checker, charger, or anything else that runs off of DC power.
- Amperage adjustable from 0.1A-10.0A
- Voltage Adjustable from 3.0V-24.0V
User Settings
- Precharge Time (Off or 1min-60min adjustable)
- Wait Time (between charge & discharge cycles, 1-60min adjustable)
- NiMh Peak Sensitivity (Default or 5mV/cell-20mV/cell adjustable)
- NiCd Peak Sensitivity (Default or 5mV/cell-20mV/cell adjustable)
- Temp Cutoff (Off or 20C-80C / 68F-176F adjustable
- Safety Timer (Off or 10min-720min adjustable)
- Capacity Cutoff (Off or 100mAh-25,000mAh adjustable)
- Input Power Low Voltage Cutoff (10.0V-15.0V adjustable)
- Key Beep and Buzzer Sound (On or Off)
- Back Light (0%-100%)
- Battery End Voltage (Adjust the voltage that the Charger will stop charging at, per cell)
  - LiPo: 4.00V/cell-4.30V/cell adjustable (4.20V/cell Default)
  - LiIo: 3.90V/cell-4.20V/cell adjustable (4.10V/cell Default)
  - LiFe: 3.40V/cell-3.90V/cell adjustable (3.60V/cell Default)
  - LiHv: 4.00V/cell-4.40V/cell adjustable (4.30V/cell Default)
  - Pb: 2.20V/cell-2.50V/cell adjustable (2.40V/cell Default)
- Factory Reset Specifications

AC Input voltage AC 100V-120V OR 220V-240V (selectable via switch)
DC Input voltage range DC 11.0V-18.0V
Charge current range 0.1A-10.0A per port
Discharge current range 0.1A-5.0A per port
Charge power limited 100W x 4
Discharge power limited 10W x 4
Balance current max 400mA
Balance tolerance ±0.01V
NiCd/NiMH battery cell count 1-16cells
Lithium battery types Li-Po, Li-HV, Li-ion, Li-Fe
Lithium battery cell count 1-6 series
Pb battery voltage 2V-24V
mAh Capacity: 100mAh - 25,000mAh (Can charge batteries w/ higher capacity, but restarting the charge process will be required once maximum is reached)
Dimensions 240mm x 192mm x 65mm