This is the EV-Peak CQ3, 400Watt Four Port Quad Charger. The charger has a selectable voltage switch so it can be used worldwide.

LiHV Battery Support
This high-end charger supports the new LiHV chemistry battery! Charge, discharge and storage charge your LiHV's

Convenience:
Charge FOUR batteries at once! Even if they are not the same chemistry, voltage, or capacity. This charger has 4 individual charge ports and plugs directly into the wall. It also can be connected to a DC power source such as a 12V car battery or a DC Power Supply. The Charger also features LiPo Balance Charge, LiPo Storage, and LiPo Discharge modes.

High Power:
The CQ3 can output up to 100Watts/10Amps from each port at the same time! Each port is fully independent of each other and has its own dedicated power! Using 100Watts/10Amps on a port in no way limits any of the other ports' ability to charge to its full potential! Max the charger out by using 100Watts/10Amps on each port at the same time for a total of 400Watts!

Reliability:
EV-Peak is known for their great reliability. They use the best internal components and circuitry available to create long lasting products. 

High Power Output:
This charger boasts 100Watts of power per port! Most chargers such as Hitec only offer 50Watts per channel. But this charger leaves them all in the dust, allowing your packs to charge faster! It offers a 10Amp charge rate!

Digital Power Mode
Each Port can act as a power supply! Use this function to power external items such as a pit light, tire truer, motor checker, charger, or anything else that runs off of DC power. Both the Voltage and Amperage are adjustable to suit the needs of the connected device.

Lithium Cell Check
Check the voltage of a Lithium battery's cells when plugged into the balance port. Simply hold the INC button when in a Lithium menu. The screen will provide a readout of each cell’s voltage.

Adjustable Cutoff Voltage
The voltage per cell at which the charger stops charging the battery can be adjusted for fine user precision. Adjustments available for LiPo, LiHV, LiIo, LiFe, Pb batteries.

Menu Options:

  • LiPo Battery, LiIon Battery, LiFe Battery, LiHv Battery
    • Charge (Final Cell Voltage is Adjustable in User Settings.)
    • Balance Charge (Balances cells inside of battery for optimal performance & safety. Final Cell Voltage is Adjustable in User Settings.)
    • Storage Mode (Brings battery to approx. half charge, best for long term non-use)
    • Discharge (Final Cell Voltage is Adjustable. LiPo 3.0V-4.0V. LiIo 3.0V-4.0V. LiFe 2.0V-3.0V, LiHv 3.0V-4.2V)
  • NiMH & NiCd Battery
    • Manual Charge (Manually set charge amperage)
    • Auto Charge (Set amperage limit, charger will auto adjust)
    • Discharge (Voltage adjustable from 0.1V-24.0V)
    • Cycle (Cycle Charge/Discharge or Discharge/Charge up to 5 times)
  • Pb (Lead Acid batteries such as the battery in your car)
    • Charge
    • Discharge
  • Digital Power
    • Use this function to power external items such as a pit light, tire truer, motor checker, charger, or anything else that runs off of DC power.
    • Amperage adjustable from 0.1A-10.0A
    • Voltage Adjustable from 3.0V-24.0V
  • User Settings
    • Precharge Time (Off or 1min-60min adjustable)
    • Wait Time (between charge & discharge cycles, 1-60min adjustable)
    • NiMh Peak Sensitivity (Default or 5mV/cell-20mV/cell adjustable)
    • NiCd Peak Sensitivity (Default or 5mV/cell-20mV/cell adjustable)
    • Temp Cutoff (Off or 20C-80C / 68F-176F adjustable
    • Safety Timer (Off or 10min-720min adjustable)
    • Capacity Cutoff (Off or 100mAh-25,000mAh adjustable)
    • Input Power Low Voltage Cutoff (10.0V-15.0V adjustable)
    • Key Beep and Buzzer Sound (On or Off)
    • Back Light (0%-100%)
    • Battery End Voltage (Adjust the voltage that the Charger will stop charging at, per cell)
      • LiPo: 4.00V/cell-4.30V/cell adjustable (4.20V/cell Default)
      • LiIo: 3.90V/cell-4.20V/cell adjustable (4.10V/cell Default)
      • LiFe: 3.40V/cell-3.90V/cell adjustable (3.60V/cell Default)
      • LiHv: 4.00V/cell-4.40V/cell adjustable (4.30V/cell Default)
      • Pb: 2.20V/cell-2.50V/cell adjustable (2.40V/cell Default)
    • Factory Reset                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                 Specifications         

    AC Input voltage AC 100V-120V OR 220V-240V (selectable via switch)
    DC Input voltage range DC 11.0V-18.0V
    Charge current range 0.1A-10.0A per port
    Discharge current range 0.1A-5.0A per port
    Charge power limited 100W x 4
    Discharge power limited 10W x 4
    Balance current max 400mA
    Balance tolerance ±0.01V
    NiCd/NiMH battery cell count 1-16cells
    Lithium battery types Li-Po, Li-HV, Li-ion, Li-Fe
    Lithium battery cell count 1-6 series
    Pb battery voltage 2V-24V
    mAh Capacity: 100mAh - 25,000mAh (Can charge batteries w/ higher capacity, but restarting the charge process will be required once maximum is reached)
    Dimensions 240mm x 192mm x 65mm

    Gross weight:2.5Kg

                                What is in side

    • CQ3 4 Port Charger
    • AC Power Cord
    • DC Power Cord
    • 4x JST-XH Balance Boards
    • 4x Deans T-Plug Charge Cables
    • Instructional Manual



    Write a review

    Please login or register to review

    EV-Peak CQ3 QUAD 4 Port 10Amps 400Watts AC/DC LiPo LiHV Battery Charger discharger

    • Product Code: MK1013
    • Availability: In Stock
    • $300.00


    This product has a minimum quantity of 100

    Related Products

    EV-PEAK A8 1350W/45A  8S DC charger discharger

    EV-PEAK A8 1350W/45A 8S DC charger discharger

    Quick DetailsBrand Name:EV-PEAKModel Number: A8DC input voltage:11.0V-32.0Vcharger power:1350Wd..

    $178.00

    EV-PEAK AR1 500W/25A DC charger discharger

    EV-PEAK AR1 500W/25A DC charger discharger

    EV-PEAK AR1 500W 25A DC 1-6S RC Battery Balance ChargerDescription:EV-PEAK AR1 integrates battery te..

    $100.00

    EV-PEAK CD2 Dual channel charger AC/DC input 50W/6A*2

    EV-PEAK CD2 Dual channel charger AC/DC input 50W/6A*2

    Specification:  AC Input Voltage 110V -220V DC Input ..

    $80.00

    EV-PEAK CQ2 four channels  50W/6Ax4  Port  Balance Charger Discharger

    EV-PEAK CQ2 four channels 50W/6Ax4 Port Balance Charger Discharger

    Product DescriptionCharge 4 batteries at the same time; AC/DC input, with the power switch ,more saf..

    $150.00

    4-In-1 8A  Charger Hub Charging For DJI Mavic  With LCD Display

    4-In-1 8A Charger Hub Charging For DJI Mavic With LCD Display

    Description:100% brand new and high qualityFeatures:The Mavic Battery Charging Hub is designed for u..

    $20.00

    T(Deans) Female+HXT 3.5mm(Red Female small hole)

    T(Deans) Female+HXT 3.5mm(Red Female small hole)

    14AWG L=50mm Silicone wire with gold-plated connectors. Weight: 7 g  ..

    $4.00

    T(Deans)Charge Lead for hard-case battery

    T(Deans)Charge Lead for hard-case battery

    14AWG L=100mm/22AWG L=60mm Silicone wire with gold-plated connectors. Weight: 13.5 g..

    $5.50

    TRX In Parallel  One Male+Female*2

    TRX In Parallel One Male+Female*2

    16AWG L=60mm Silicone wire with gold-plated connectors. Weight: 15 g..

    $8.00

    TRX Male+T(Deans) Female

    TRX Male+T(Deans) Female

    14AWG L=50mm Silicone wire with gold-plated connectors. Weight:8.1  g ..

    $3.00

    TRX Female+T(Deans) Male

    TRX Female+T(Deans) Male

    14AWG L=50mm  Silicone wire with gold-plated connectors. Weight: 9.1 g ..

    $3.50

    Professional charge Lead 4.0mm Bullet+4.0mm banana  L=600mm for Hard-case Battery

    Professional charge Lead 4.0mm Bullet+4.0mm banana L=600mm for Hard-case Battery

    12AWG L=600MMSilicone wire with gold-plated connectors. Weight: 81 g..

    $15.00

    Professional charge Lead 4.0mm/5.0mm Bullet+4.0mm banana L=600mm for Hard-case Battery

    Professional charge Lead 4.0mm/5.0mm Bullet+4.0mm banana L=600mm for Hard-case Battery

    12 AWG L =600mm, 4.0mm/5.0mm bullet plug are all OK. Silicone wire with gold-plated connectors...

    $16.00

    4.0mm Banana(HXT)+T(Deans) Male Direct melting

    4.0mm Banana(HXT)+T(Deans) Male Direct melting

    Gold-plated connectors. 4.0mm HXT (4.0 banana), Very good for Redcat RC car. Weight: 7.0 g &nbs..

    $4.20

    4.0mm Banana(HXT)+4.0mm Banana Male

    4.0mm Banana(HXT)+4.0mm Banana Male

    12 AWG L=220mmSilicone wire with gold-plated connectors. Weight:  33.1g  ..

    $8.00

    Tamiya Female To 4.0mm Banana(HXT) L=100mm

    Tamiya Female To 4.0mm Banana(HXT) L=100mm

    14AWG L=100mm  Silicone wire with gold-plated connectors. Weight:  12.2g  ..

    $6.00

    Tamiya Female To Traxxas Male   L=100mm

    Tamiya Female To Traxxas Male L=100mm

    14AWG  L=100mmSilicone wire with gold-plated connectors. Weight:10.6  g  ..

    $6.00

    T(Deans) Female To 3.5mm Banana (HXT)   L=100mm

    T(Deans) Female To 3.5mm Banana (HXT) L=100mm

    14AWG  L=100mmSilicone wire with gold-plated connectorsWeight:9.8 g..

    $5.00

    4.0mm Banana plug series Charging wires  1 set

    4.0mm Banana plug series Charging wires 1 set

    18/22AWG  L=100/150mmPVC wire with Gold plated connectorsWeight: 61g..

    $15.50

    XH To 51005 Female  L=50mm  4pin XH port with 3 Female 51005

    XH To 51005 Female L=50mm 4pin XH port with 3 Female 51005

    24AWG  L=50mm Silicone wire with gold-plated connectors. Weight:  2.4g..

    $3.50

    4.0mm bullet Plug One Pcs

    4.0mm bullet Plug One Pcs

    Color:GoldNet Weight:1.7g/pcsType: Bullet typeGender: Male Plating: GoldMaterial: CopperRated C..

    $1.25

    4.0 mm  Banana plug and housing (HXT) one pcs

    4.0 mm Banana plug and housing (HXT) one pcs

    Color:RedNet Weight:4.3g/pairType: Lantern typePlating: GoldMaterial: CopperRated Current: 50A / Max..

    $1.50

     RC Plane Helicopter Lost Alarm Finder Tracker OVER 50m

    RC Plane Helicopter Lost Alarm Finder Tracker OVER 50m

    Specification:Weight: 7.3gOperating Voltage : 4-6 volts DCLow Current consumption : < 35 mA (1 mA..

    $5.50

    3 in 1 LCD Discharger Balancer Meter Tester for 2-6S LiPo Li-Fe battery

    3 in 1 LCD Discharger Balancer Meter Tester for 2-6S LiPo Li-Fe battery

    Features:The balance function can be executed before/after battery charged, or during battery chargi..

    $16.00

    Adjustable 1S-8S Lithium Battery Voltage Tester  BB Ring Low Pressure Alarm

    Adjustable 1S-8S Lithium Battery Voltage Tester BB Ring Low Pressure Alarm

    On Board Lipoly Low Voltage Alarm (1s~8s)Simple to use Lipoly tester with low voltage alar..

    $3.00

    1S-8S Lipo Li-ion Battery Low Voltage Tester Buzzer Alarm Dual Speak New BB ring

    1S-8S Lipo Li-ion Battery Low Voltage Tester Buzzer Alarm Dual Speak New BB ring

    Description:100% brand new and high qualityUse for 1-8s Lipl/Li-ion/LiMn/Li-FeVoltage detection pric..

    $4.00

    7.4 V 2S XH parallel balance board 2S*12XH port

    7.4 V 2S XH parallel balance board 2S*12XH port

    Description:100% brand new and high quality.Parallel charging board for batteries used in the Blade ..

    $5.00

    JST-XH 2-6S LiPO Balance Board Adapter

    JST-XH 2-6S LiPO Balance Board Adapter

    This is a balancing adapter board for batteries with a JST-XH balance connector. This will plug into..

    $5.00

    Temperature Sensor Cable for  Balance Charger

    Temperature Sensor Cable for Balance Charger

    Features:The temperature Sensor enables you to use on any  chargers equipped with temperat..

    $7.50